NEC SL1100 - Cable Routing and Clamping; Figure 2-23 Cabling; Table 2-6 RJ61 Cable Connector Pin-Outs (J101-J103)

Table 2-6 RJ61 Cable Connector Pin-Outs (J101-J103)
Pin No. ESI 1-4 (J101), ESI 5-8 (J102):
2-Wire Digital Extension Port
Connector (RJ-61)
SLI 9-12/DPH 1-2 (J103): Analog
Extension Port Connector
(RJ-61)
8 765 4321
1 T4 (Tip for port 4) T4 (Tip for port 4)
2 T3 (Tip for port 3) T3 (Tip for port 3)
3 T2 (Tip for port 2) T2 (Tip for port 2)
4 R1 (Ring for port 1) R1 (Ring for port 1)
5 T1 (Tip for port 1) T1 (Tip for port 1)
6 R2 (Ring for port 2) R2 (Ring for port 2)
7 R3 (Ring for port 3) R3 (Ring for port 3)
8 R4 (Ring for port 4) R4 (Ring for port 4)
1.6.5 Cable Routing and Clamping
1. Depending on cabling requirement, select the right, the left or both route. Clamp and route cable
to outside.
Cables
Cable clamp
Figure 2-23 Cabling
SL1100 ISSUE 5.0
2-18 Installation