NEC SL1100 - Figure 2-69 Replacing the Main-Cover; Figure 2-70 Plastic Knockouts on 084 M-B1;080 E-B1;008 E-B1;000 E-B1; Figure 2-71 Installing the 4 COIDB-B1; Mounting the 4 COIDB PCB

9. Replace the Main-cover and fasten two screws.
Two screws
Hooks
Main-Cover
Figure 2-69 Replacing the Main-cover
3.3.2 Mounting the 4COIDB PCB
1. Cut and remove specified Plastic Knockouts on the 084M-B1/080E-B1/008E-B1/000E-B1 PCB.
084M-B1
080E-B1/008E-B1
Plastic
Knockout
Plastic
Knockout
000E-B1
Plastic
Knockouts
Figure 2-70 Plastic Knockouts on 084M-B1/080E-B1/008E-B1/000E-B1
2. Insert two Nylon-spacers into the specified holes. Using supplied screw, fasten Metal Spacer to
4COIDB-B1 PCB.
3. Mount the 4COIDB-B1 PCB onto the 084M-B1/080E-B1/008E-B1/000E-B1 PCB using two Nylon-
spacers and one screw. (Refer to Figure 2-71 Installing the 4COIDB-B1 on page 2-49)
SL1100
ISSUE 5.0
2-48 Installation