NEC SL1100 - Figure 2-38 Bases and Support of the Battery Box; Figure 2-39 Floor-Mount Spacing Guide

1. Assemble the FM/WM Base-F, Base-R and WM Support.
WM Support
FM/WM Base-R
FM/WM Base-F
Figure 2-38 Bases and Support of the Battery Box
2. Refer to Figure 2-39 Floor-Mount Spacing Guide on page 2-28 for required spacing before
drilling holes for 10 mm (0.394″) anchor bolts (locally procured).
Mark and drill the four holes required to install the FM/WM Base.
3. Using anchor bolts, secure the FM/WM Base to the floor.
Four Anchor bolts
M10 mm (0.394″)
Front side
Front side
: Maintenance space
Wall
150 mm
(5.906″)
150 mm
(5.906″)
460 mm (18.110″)
460 mm (18.110″)
AC inlet
side
AC inlet
side
500 mm (19.685″)
190 mm
(7.480″)
Anchor bolt location
Figure 2-39 Floor-Mount Spacing Guide
SL1100 ISSUE 5.0
2-28 Installation