NEC SL1100 - Chapter 7 Application Level Configuration; SECTION 1 INTRODUCTION; SECTION 2 PREFERENCES MENU

5.1.2.2 High position setting
1. Turn telephone over (button side down).
2. Pull up the Leg Stoppers.
Leg
Leg Stopper
Figure 2-92 Setting for High Position
3. Adjust the leg to desired height.
Leg
< High position >
Figure 2-93 Leg Setting for High Position
4. Lead the Line and Handset cords through the applicable grooves.
(Refer to Figure 2-91 Cabling of Multiline Telephone on page 2-66)
ISSUE 5.0 SL1100
Hardware Manual 2-67