NEC SL1100 - Figure 2-67 Mounting Three Expansion Interface Cards; Figure 2-68 Plastic Knockouts

7. Following illustration shows an example for installing 3 expansion PCBs onto the KSU.
2nd PCB
3rd PCB
(1PRIU)
1st PCB
Figure 2-67 Mounting Three Expansion Interface Cards
8. Cut and remove the Plastic Knockouts as required for each Expansion interface card.
Main-Cover
Plastic
Knockouts
EXP.1st PCB
EXP.2nd PCB
EXP.3rd PCB
Figure 2-68 Plastic Knockouts
ISSUE 5.0
SL1100
Hardware Manual 2-47