NEC SL1100 - Figure 2-40 Mounting the Battery Box; Figure 2-41 Securing the Battery Box; Wall-Mounting the IP4 WW-Battery Box

4. Using the four hooks on the FM/WM Base mount the IP4WW-Battery Box on the Base.
Hooks
Hooks
Hooks
IP4WW-Battery Box
Hooks
FM/WM Base
FM/WM Base
Figure 2-40 Mounting the Battery Box
5. Using four supplied screws, secure the IP4WW-Battery Box to the FM/WM Base.
Two Screws
(M4 X 8)
Two Screws
(M4 X 8)
IP4WW-Battery Box
FM/WM Base
FM/WM Base
Figure 2-41 Securing the Battery Box
2.6.2 Wall-Mounting the IP4WW-Battery Box
When wall-mounting the IP4WW-Battery Box, ensure the wall can support the
weight of the Battery Box (Total weight=17.6 kg (620.75 oz) - Including 2-
batteries, cord, KSU, etc). The Battery Box is secured to the wall using the
FM/WM BASE. Ensure that enough space is available to allow the installation
of additional KSU.
ISSUE 5.0 SL1100
Hardware Manual 2-29