NEC SL1100 - Figure 2-153 Six Repeaters Attached to Base; Figure 2-154 Daisy-Chain Layout

Figure 2-153 Six Repeaters Attached to Base
In addition, the DTL-RPT-2 Repeater supports a sequential or “daisy chain” layout to extend coverage
in a single direction. Up to three repeaters can be installed in sequence.
Figure 2-154 Daisy-Chain Layout
When a repeater powers on, it searches for signals from the base and any other repeaters registered
to the same base. The repeater will automatically connect to the strongest available signal. You can
combine “star” and “daisy chain” layouts to create a wide variety of coverage configurations, as long
as you have no more than six repeaters per base unit.
SL1100
ISSUE 5.0
2-106 Installation