NEC SL1100 - Figure 2-160 Incorrect Installation; Figure 2-161 Correct Repeater Installation

3. Make a note where you begin to hear noise on the line (the signal is getting weaker). The best
location for Repeater 2 is as far from Repeater 1 as possible while still maintaining a good signal.
4. Repeat the process with Repeater 3, if necessary.
6.3.5.4 Multiple Repeater Systems
You can register up to six repeaters to one base as long as the repeaters are a minimum of 35 feet
apart. Remember the signal can cross through walls and floors. Figure 2-160 Incorrect Installation on
page 2-112 illustrates repeaters that have been incorrectly installed.
Figure 2-160 Incorrect Installation
Figure 2-161 Correct Repeater Installation on page 2-112 illustrates repeaters that have been
correctly installed.
Figure 2-161 Correct Repeater Installation
SL1100
ISSUE 5.0
2-112 Installation