NEC SL1100 - Chapter 4 Outlook Add-In; SECTION 1 OUTLOOK ADD-IN

5. In case a 2nd PCB is mounted, insert two Nylon-spacers into the specified holes, and fasten two
Metal-spacers into the specified holes. (Both Nylon and Metal spacers are provided with 080E/
008E/000E/1PRIU)
Fasten two screws to secure the 2nd PCB to the top of the 080E/008E/000E/1PRIU.
Expansion Interface Card
(2nd PCB)
J1
J2
Nylon-Spacers
Metal-Spacers
Screws
Expansion Interface Card
(1st PCB)
Screw position
Both sides are
the same.
2nd EXP.
PCB
Figure 2-65 Mounting the 2nd Expansion Interface Card
ISSUE 5.0 SL1100
Hardware Manual 2-45