Issue 6.0 NEC SL1100
7 - 14 SIP Trunking
22-02-01
Incoming Call Trunk Setup 0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID Mode Switching
Default = 0
Set the feature type for the
trunk you are programming.
(Second dial tone for option 1 if
no VRS is installed)
84-26-01
IPL Basic Setup – IP
Address
XXX.XXX.XXX.XXX
Assign the VOIPDB Gateway IP
Address.
VoIP GW Number 1:
172.16.0.20
84-26-02
IPL Basic Setup – RTP Port
Number
0 ~ 65534
Default:
VoIP GW1 = 10020
84-26-03
IPL Basic Setup – RTCP
Port Number
(RTP Port Number + 1)
1 ~ 65535
Default:
VoIP GW1 = 10021
Program/Item
No.
Description/
Selection
Assigned Data Comments
To Next Page
Loading...
