NEC SL1100 - SIP Registrar Setup

NEC SL1100 Issue 6.0
Networking Manual 7 - 27
6.10 SIP Registrar Setup
10-29-03
SIP Server Information
Setup – Default Proxy IP
Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.225.255.254
Default is 0.0.0.0
 Version 5.0 or higher: Select SIP
Profile 1-2.
Enter the default Proxy IP
Address if the SIP carrier is
using an IP Address for the
Proxy. In most cases, this is left
at the default entry as the
domain name is used.
10-29-04
SIP Server Information
Setup – Default Proxy Port
Number
0 ~ 65535
Default is 5060
 Version 5.0 or higher: Select SIP
Profile 1-2.
Define the Proxy Port Number.
10-29-12
SIP Server Information
Setup – Proxy Domain
Name
64 characters maximum
Default not assigned
 Version 5.0 or higher: Select SIP
Profile 1-2.
Define the Proxy Domain Name
(NEC SL1100 domain name).
10-29-13
SIP Server Information
Setup – Proxy Host Name
48 characters maximum
Default not assigned
 Version 5.0 or higher: Select SIP
Profile 1-2.
Define the Proxy Host name
(NEC SL1100 proxy name).
Program/Item
No.
Description/
Selection
Assigned Data Comments
Program/Item
No.
Description/
Selection
Assigned Data Comments
10-29-05
SIP Server Information
Setup – Registrar Mode
0 = None
1 = Manual
Default is 0
 Version 5.0 or higher: Select
SIP Profile 1-2.
Define the Registrar Mode. This
should always be set to manual
when using SIP trunking.