Issue 6.0 NEC SL1100
7 - 12 SIP Trunking
14-18-05
IP Trunk Data Setup – SIP
Profile (SIP Only)
1 = Profile 1
2 = Profile 2
Default = 1
Define the SIP profile for each SIP
trunk.
22-02-01
Incoming Call Trunk Setup 0 = Normal
1 = VRS (second dial tone if
no VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID Mode Switching
Default = 0
Define the SIP trunks as type 3 (DID). In
addition to the SIP trunk programming,
refer to the Direct Inward Dialing (DID)
feature in the NEC SL1100 Features
and Specifications Manuals and the
NEC SL1100 Programming Manual for
detailed information.
Program/
Item No.
Description/
Selection
Assigned Data Comments
To Next Page
Loading...
