NEC SL1100 - Figure 9-5 Example Configuration 3 - Static IP Addressing, Routed WAN

NEC SL1100 Issue 6.0
Networking Manual 9 - 11
6.3 Example Configuration 3 - Static IP Addressing, Routed WAN
This example shows IP Phones connected to an NEC SL1100 system over a
Wide Area Network (WAN), with static IP addressing. This is a typical
scenario - a small branch office connecting to the main office.
Figure 9-5 Example Configuration 3 - Static IP Addressing, Routed WAN
CPU
VoIP
Switch
IP Phone 1
192.168.2.200
IP Phone 2
192.168.2.201
VoIPDB IP Address: 192.168.1.20
VoIP Gateway: 192.168.1.21
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.254
Router VPN
192.168.1.254
Switch/Hub
WAN
(Leased Line, Frame
Relay, etc.)
Router VPN
192.168.2.254