NEC SL1100 - Figure 6-8 Common Network with Cisco Router; Configuration Examples for Classification and Queuing

NEC SL1100 Issue 6.0
Networking Manual 6 - 29
6.7.4 Configuration Examples for Classification and Queuing
Figure 6-8 Common Network with Cisco Router shows a typical
network scenario and an example of a Cisco router configuration.
 This document provides a general description of VoIP
technology, but it does not discuss individual manufacturer
solutions. This sample configuration is provided as a common
scenario. It is a good example of how QoS can be implemented
on a router.
NEC does not endorse or provide support on any third party
equipment unless it is supplied by NEC.
See Table 6-7 Cisco Router Configuration Example for configuration
information about the Cisco 2621 router. A description of key
commands follows.
Figure 6-8 Common Network with Cisco Router
256Kbps
Private Circuit
(Leased Line)
Data Switch Data Switch
100Mbps100Mbps
100Mbps 100Mbps
100Mbps
100 Mbps
Dallas Fort Worth
PC
192.168.1.50
10.0.0.1 10.0.0.2
PC
192.168.2.50
Telephone System
192.168.1.10
Telephone System
192.168.2.10
Cisco 2621Cisco 2621
192.168.2.1
192.168.1.1