NEC SL1100 - Table 9-4 IP Phone Relocation

Issue 6.0 NEC SL1100
9 - 70 IP Multiline Station (SIP)
Table 9-4 IP Phone Relocation
Program/
Item No.
Description/
Selection
Assigned Data Comments
10-46-01
DR700 Server Information
Setup – Register Mode
0 = Plug and Play
1 = Automatic
2 = Manual
Default is 0
Set up the information of the SIP
Multiline (DR700 series) Server.
This Program is a system-wide setting.
15-05-27
IP Telephone Terminal
Basic Data Setup –
Personal ID Index
0~128
0
Default is 0
Used when the SIP Multiline telephone
is using manual/
auto registration. Assign each phone a
unique personal index. Then go to
command 84-22 to assign the user
name and password.
84-22-01
DR700 Multiline Logon
Information Setup – User ID
Up to 32 characters
Default not assigned
Input the User ID when using manual
or auto
registration (Program 10-46-01).
84-22-02
DR700 Multiline Logon
Information Setup –
Password
Up to 16 characters
Default not assigned
Input the Password when using
manual or auto registration (Program
10-46-01).
84-22-04
DR700 Multiline Logon
Information Setup – Log Off
0 = Off
1 = On
Default is 1
Input the Personal ID from terminal
automatically when log on again.
If set to 0, IP Phone Relocation fails.