NEC SL1100 - SIP DNS Setup

NEC SL1100 Issue 6.0
Networking Manual 7 - 23
6.5 SIP DNS Setup
84-13-58
SIP Trunk CODEC
Information Basic Setup –
TCF Handling Method
0 = (Local) Receive TCF signal
by VoIPDB
1 = (Network) Through TCF
signal to external FAX
Default is 1
 Version 5.0 or higher: Select SIP
Profile 1-2.
84-13-61
SIP Trunk CODEC
Information Basic Setup –
T.38 RTP Format Payload
Number
96 ~ 127
Default is 100
 Version 5.0 or higher: Select SIP
Profile 1-2.
Program/Item
No.
Description/
Selection
Assigned Data Comments
Program/Item
No.
Description/
Selection
Assigned Data Comments
10-29-08
SIP Server Information
Setup – DNS Server Mode
0 = Off
1 = On
Default is 0
 Version 5.0 or higher: SIP Profile
Data 1 is used.
Define the DNS Mode. If the
SIP carrier provides a domain
name, turn this option on.
10-29-09
SIP Server Information
Setup – DNS Server IP
Address
0.0.0.1 - 126.255.255.254
128.0.0.1 - 191.255.255.254
192.0.0.1 - 223.225.255.254
Default is 0.0.0.0
 Version 5.0 or higher: SIP Profile
Data 1 is used.
Define the DNS IP Address
(normally provided by the SIP
carrier). Enter the carrier-
provided information or enter a
valid DNS server IP address.