NEC SL1100 - Figure 9-20 Type of Service Window

Issue 6.0 NEC SL1100
9 - 38 IP Multiline Station (SIP)
Enter Values on a Per Phone Basis
 By the web browser
 By configuration mode through the dial pad
To enter the values per phone, browse to the individual phone or enter the
configuration mode through dial pad.
The following example describes assigning these fields via the web browser.
1. Log in on PC. Refer to Section 13.5.1 Logging In on the PC on page
9-24.
2. Go to Network Settings>Advanced Settings>Type Of Service.
Figure 9-20 Type of Service Window