EasyManua.ls Logo

NEC SL1100 - Chapter 6 Desktop Application Startup; SECTION 1 FULL WINDOW MODE

NEC SL1100
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NEC SL1100 Issue 6.0
Networking Manual 7 - 3
3.1.1 SIP Trunking Requirements
The following are required when using the SIP trunk on the NEC
SL1100 system:
CPU-B1 software
VOIPDB (VoIP Daughter Board) Programming Conditions
The following conditions apply when programming the NEC SL1100
system for SIP Trunking:
If entries are made in Program 10-29-xx for a SIP Server and
the SIP Server is then removed or not used, the entries in
Program 10-29-xx must be set back to their default settings.
Even if Program 10-29-01 : SIP Proxy Setup – Outbound
Proxy is set to 0, the NEC SL1100 system checks the settings
in the remaining 10-29 programs.
Figure 7-1 Common IP Network using NEC SL1100 SIP Trunk
SIP CARRIER
SIP Registrar
SIP
SIP Multiline
Terminal
NAPT
SIP Proxy
DNS
PSTN
Internet/
IP VPN
SIP UA

Table of Contents

Other manuals for NEC SL1100

Related product manuals