NEC SL1100 - Figure 9-34 Automatic Registration User Name and Password Assignment

NEC SL1100 Issue 6.0
Networking Manual 9 - 65
7. Program 84-22-01
Assign the user ID and password to be associated with the
Personal ID Index assigned in Step 6.
8. The SIP MLT Station requires assignments to be made in the
phone itself. Enter the Program Mode in the station using the
following steps.

The station does not require an Ethernet connection to enter the
program mode. Only power is required. Power can be provided
by an AC adapter plugged into the phone or by POE provided by
a data switch. If the data switch is providing POE it MUST be
using the 802.3AF standard.
For Basic bench testing, only the following assignments are
required:
Figure 9-34 Automatic Registration User Name and Password Assignment