NEC SL1100 - Sip System Interconnection Setup

Issue 6.0 NEC SL1100
7 - 24 SIP Trunking
6.6 SIP NAPT Router Setup
6.7 SIP System Interconnection Setup
10-29-10
SIP Server Information
Setup – DNS Port Number
0 ~ 65535
Default is 53
 Version 5.0 or higher: SIP Profile
Data 1 is used.
Define the DNS Transport port.
Program/Item
No.
Description/
Selection
Assigned Data Comments
Program/Item
No.
Description/
Selection
Assigned Data Comments
10-12-07
CPU Network Setup –
NAPT Router IP Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
Default is 0.0.0.0
Set the NAPT Router IP
address. With SIP trunking, the
IP address of the WAN side of
the router must be entered.
10-12-08
CPU Network Setup – ICMP
Redirect
0 = Disable
1 = Enable
Default is 0
Enable/Disable ICMP (Internet
Control Message Protocol)
Redirect.
Program/Item
No.
Description/
Selection
Assigned Data Comments
10-23-01
SIP System Interconnection
Setup – System
Interconnection
0 = Disable
1 = Enable
Default is 0
Enable/Disable system
interconnection.