NEC SL1100 - Example Configuration 2 - Dynamic IP Addressing, One LAN

NEC SL1100 Issue 6.0
Networking Manual 9 - 9
6.2 Example Configuration 2 - Dynamic IP Addressing, One LAN
This example shows System IP Phones connected to a single LAN (no
routers) with dynamic IP Addresses. The DHCP server could be:
 Customer supplied (e.g., Windows 2003 server)
 inDHCP internal DHCP server
Programming - CPU:
10-12-01 :
CPU Network Setup - IP Address
(for CPU)
10-12-10 :
CPU Network Setup - Subnet M ask
10-12-03 :
CPU Network Setup - Default Gateway
10-12-09 :
CPU Network Setup - VoIPDB IP Address
(This assignment is for when the VoIPDB daughter board is
installed.)
0.0.0.0
255.255.255.0
192.168.1.254
192.168.1.20
Programming - VoIP DSP Resource:
84-26-01 : VoIP Basic Setup - IP Address (Slot # - DSP) 192.168.1.21
Programming - IP Phones:
DHCP Mode
IP Address
Subnet Mask
Default Gateway
Disabled
192.168.1.200
255.255.255.0
192.168.1.254