NEC SL1100 - IP DSP Resource

NEC SL1100 Issue 6.0
Networking Manual 7 - 13
6.2 IP DSP Resource
 If any IP Address or NIC settings are changed, the system must be reset
for the changes to take affect.
Program/Item
No.
Description/
Selection
Assigned Data Comments
10-03-01
VoIPDB Configuration –
Logical Port Number
0 ~ 32
The CPU-B1 automatically
assigns each blade during
installation. READ ONLY
10-03-02
VoIPDB Configuration –
Trunk Type
0 = H.323
1 = SIP
Default = 1
Assign each trunk type for each
DSP Resource.
10-19-01
VoIP DSP Resource
Selection – VoIP DSP
Resource Selection
0 = Commonly used for both IP
Extensions and Trunks
1 = Use for IP Extensions
2 = Use for SIP Trunks
5 = Blocked
6 = Common without Unicast
Paging
7 = Multicast Paging
8 = Unicast Paging
Default:
Resource 1 = 1
Resources 2~32 = 0
Define the criteria for each DSP
resource on the VoIP blade.
14-05-01
Trunk Group Trunk Group = 0~25
Priority = 1 ~ 84
Default = Group1 for all trunk
ports and priorities
Default priorities for trunks 1~84
is 1~84.
Assign Trunks to Trunk
Groups/Outbound Priority