Networking Manual 4 - 1
General IP Configuration
4General IP Configuration
SECTION 1 INTRODUCTION
The NEC SL1100 system uses IP for various applications, including:
System Programming
Voice Over IP
This section describes the procedure for connecting the NEC SL1100
system to an existing data network and configuring TCP/IP. This is the first
step in implementing VoIP and other IP applications.
Enhancements
With SL1100 Version 1200 (V1.20) and VoIP daughter board installed,
half duplex connections are not supported. For troubleshooting
purposes, a managed switch capable of port mirroring is required to
capture packet data from the SL1100 VoIPDB Ethernet port.
To Next Page
Loading...
