NEC SL1100 - Chapter 7 Application Level Configuration; SECTION 1 INTRODUCTION; SECTION 2 PREFERENCES MENU

NEC SL1100 Issue 6.0
Networking Manual 7 - 11
10-29-14
SIP Server Information
Setup – SIP Carrier Choice
0 = Default
1 = Carrier A
2 = Carrier B
3 = Carrier C
4 = Carrier D
5 = Carrier E
6 = Carrier F
7 = Carrier G
8 = Carrier H
9 = Carrier I
10 = Carrier J
11 = Carrier K
12 = Carrier L
13 = Carrier M
14 = Carrier N
15 = Carrier O
16 = Carrier P
17 = Carrier Q
18 = Carrier R
19 = Carrier S
20 = Carrier T
21 = Carrier U
22 = Carrier V
23 = Carrier W
24 = Carrier X
25 = Carrier Y
26 = Carrier Z
Default = 0
 Version 5.0 or higher: Select
SIP Profile 1-2.
Define the SIP Carrier Choice.
10-40-01
IP Trunk Availability – IP
Trunk Availability
0 = Disable
1 = Enable
Default = 0
Determine SIP Trunk availability.
10-40-02
IP Trunk Availability –
Number of Ports
0~32
Default = 0
Determine the IP trunk type setup.
With SIP trunking, some ports must be
defined for SIP.
Program/
Item No.
Description/
Selection
Assigned Data Comments