Issue 6.0 NEC SL1100
7 - 10 SIP Trunking
The recover timer is either five minutes or 30 minutes. Typically, five
minutes is used.
SECTION 6 SIP TRUNK PROGRAMMING
6.1 SIP Trunk Basic Setup
Program/
Item No.
Description/
Selection
Assigned Data Comments
10-28-01
SIP System Information
Setup – Domain Name
64 characters maximum
Default not assigned
Version 5.0 or higher: Select
SIP Profile 1-2.
Define the domain name. This
information is generally provided by the
SIP carrier.
10-28-02
SIP System Information
Setup – Host Name
48 characters maximum
Default not assigned
Version 5.0 or higher: Select
SIP Profile 1-2.
Define the Host name. This information
is generally provided by the SIP carrier.
10-28-03
SIP System Information
Setup – Transport Protocol
0 = UDP
1 = TCP
Default = 0
Version 5.0 or higher: Select
SIP Profile 1-2.
Define the Transport type. This option
will always be set to UDP.
10-28-05
SIP System Information
Setup – Domain
Assignment
0 = IP Address
1 = Domain Name
Default = 0
Version 5.0 or higher: Select
SIP Profile 1-2.
Define the Domain Assignment. This
entry is determined by what information
the SIP carrier provides. If the SIP
carrier provides a server name:
SIPconnect-sca@L0.cbeyond.net
the domain would be:
@L0.cbeyond.net
and the host name would be:
SIPconnect-sca.
To Next Page
Loading...
