Issue 6.0 NEC SL1100
9 - 68 IP Multiline Station (SIP)
At this point, you are prompted with a User Name and
Password. These are the defaults:
User Name: ADMIN
Password: 6633222
The user name should already be entered in the terminal.
Press Set soft key to step down to the password field.
After you enter the password, press OK soft key.
Network Settings
DHCP Mode - DHCP Disable. Click OK.
IP Address - Enter the IP Address for the station, and click
OK.
Default Gateway - Enter the Default Gateway Address, and
click
OK. If you are testing without a router/gateway, this
must be left at the default 0.0.0.0
Subnet Mask - Enter the Subnet Mask for the station, and
click
OK.
SIP Settings
Do not enter any information in the SIP user field. When
the phone boots up, it requires a user name and password.
These are preassigned in the system. When entered
correctly, the phone is provided an extension number.
Server Address & URI - 1
st
Server Address
Enter the IP address assigned in command 10-12-09, and
click
OK.
SIP Server Port - 1
st
Server Port
Enter port 5080, and click
OK.
Press the EXIT key until you are back at the Main menu.
Press the SAVE key, and the phone saves the configuration
to memory, reboots itself and registers with the CPU.
To Next Page
Loading...
