NEC SL1100 - Page 238

Issue 6.0 NEC SL1100
11 - 8 NAPT
15-05-45 NAT Plug&Play Effective when PRG 10-46-14 is
set to NAT Mode. Select sending
RTP port number to remote router,
use from negotiation result (0) or
received RTP packet (1).
0 = Off
1 = On
Default = Off

84-26-01 VoIPDB Basic Setup (DSP)– IP
Address
Assign the IP address for the VoIP
Gateway.
Default = 172.16.0.20

84-26-02 VoIPDB Basic Setup (DSP)– RTP
Port Number
Assign the RTP port number to be
used for the DSP on the VoIPDB.
VoIP GW = 10020

84-26-03 VoIPDB Basic Setup (DSP)– RTP
Port Number (RTP Port Number
+ 1)
Define the port number for RTCP
to use for each DSP.
VoIP GW = 10021

Program
Number
Program Name Description/Comments Assigned Data
Level
1 2 3