Issue 6.0 NEC SL1100
4 - 4 General IP Configuration
Assume that a NEC SL1100 is added to the existing data network. The
Network Administrator (or IT Manager) should provide the following:
IP Address (for the CPU-B1)
IP Addresses (for the VoIP daughter board)
Subnet Mask
Default Gateway
A spare switch
First, program the NEC SL1100:
192.168.1.200
255.255.255.0
PRG10-12-03: 192.168.1.254
A system reset is required for the IP Address changes to take effect.
Figure 4-1 Example Configuration 1 - Existing Network with Static IP Address
Router
(Default Gateway)
WAN,
Internet, etc.
192.168.1.254
192.168.1.50
192.168.1.32
192.168.10.11 192.168.1.10
Switch
To Next Page
Loading...
