Issue 6.0 NEC SL1100
5 - 6 Programming
SECTION 6 USING SOFTKEYS FOR PROGRAMMING
Each NEC SL1100 display telephone provides interactive Softkeys for intuitive feature
access. The options for these keys will automatically change depending on where you
are in the system programming. Simply press the Softkey located below the option
you wish and the display will change accordingly.
Pressing the VOLUME or VOLUME will scroll between the menus.
Clear/Back Clear the character entry one character at a time.
Flash Clear all the entries from the point of the flashing cursor and to
the right.
Table 5-2 Keys for Entering Names
Use this keypad digit . . . When you want to. . .
_
Program Mode
Base Service OP1 OP2
To Next Page
Loading...
