3.4 Using the Continuous Function
DP Series/DP Series Type R
67
Table 3-11 Main Measurement Functions (continued)
Item Description Unit
Q Reactive power The reactive power provided to the load.
The power of the phase is displayed when
in the phase voltage display. The total
power of all phases is displayed when in
the line voltage display.
var
PF Power factor The power factor of the load. The power
factor of the phase is displayed when in
the phase voltage display in the
polyphase model and polyphase system.
It is not displayed when in the line
voltage display.
[DP series Type R only]
When the reverse power flow is
occurring, the displayed value will be
negative.
—
CF Crest factor The crest factor of the output current
(peak value/effective value). It is not
displayed for the line voltage display in
the polyphase model and polyphase
system.
—
F Synchronization frequency The measured frequency value of the
synchronization signal source when the
signal source is SYNC.
Hz
To Next Page
Loading...