3-98
3
MENU/4: Data
UP/MP/CC/RE records
All coordinate records include the “PT”, “CD”, and “X/Y/Z”.
By pressing the [DSP] key, the display toggles between PT/X/Y/Z and
PT/CD.
UP: Uploaded point coordinates.
MP: Manually input point coordinates.
CC: Calculated coordinates. Points calculated in “COGO”.
RE: Calculated coordinates. Points calculated in “Resection”.
When the “Store data” setting (See p.3-82) is “Both” or “XYZ”, shots on
the BMS (SS), in Stakeout (SO) and in ANG/Rept (CP) store coordinate
records as well. The format of the data is the same as other coordinate
records.
Pressing the [DSP] key switches the display for UP/MP/CC/RE records
in the following order.
The header (XYZ,YXZ,NEZ, or ENZ) depends on the Coord. Label
setting in MENU/3:Sett/3:Coord. (See p.3-91)
When no record is stored in the
Coordinate database, it shows an
error screen. Press any key to return
to the previous screen.
Ｎｏ Ｄａｔａ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
PT:
X:
Y:
Z:
1st screen
2nd screen
PT:
CD:
To Next Page
Loading...
