8-4
8
ERROR MESSAGES AND ACTIONS
Selected point for ST/BS doesn’t have
N/E coordinates defined. Or, the point
specified as Benchmark doesn’t have a Z
coordinate.
Action : Press any key to return to the
point input screen.
In Resection, the calculation is failed after
deleting a point in View screen.
Action : Press any key to return to the
point input screen. You need to
take another shot to have a
calculated STN coordinate.
5) In StakeOut
If no Stn Setup or BS check is done when
entering the Stakeout function.
[1:Continue]= goes to Stakeout menu
[2:STN]= jumps to STN menu
[3:Abort]/[ESC]=returns to the BMS
！Ｉｎｓｕｆｆｉｃｉｅｎｔ
ＸＹＺ Ｒｅｃｏｒｄ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
When [1:Continue] is selected, the coordinates from the previous
station setup will be used. You should only do this is a testing
situation or when you know the previous ST coordinates and
current HA orientation are still correct.
！Ｎｏ ＳＴＮ／ＢＳ Ｃｈｋ
１：Ｃｏｎｔｉｎｕｅ
２：ＳＴＮ Ｓｅｔｕｐ
３：Ａｂｏｒｔ
！Ｃａｎ’ｔ Ｃａｌｃ ＳＴ
Ｎｅｅｄ ａｄｄｉｔｉｏｎａｌ
ＰＴ ｔｏ ｃａｌｃ ＳＴＮ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
To Next Page
Loading...
