Nikon DTM-330 - 10) Comm.

8-8
8
ERROR MESSAGES AND ACTIONS
When attempting to edit a coordinate used
as a ST or BS
by [2:XYZ data]
[MENU] [2:Edit]:
Action : Press any key to return to the
Data view screen.
When an existing code/layer name is
input by [3:Code List] [MENU]
[2:Edit], [3:Add Code], [4:Add Layer] :
Action : Press any key to return to the
code/layer name input screen.
In the XYZ data view, if the [2:Edit]
function is selected in a SO/SS/CP
record’s view screen, it shows an error.
SO/SS/CP can be edited/deleted only
from RAW data view screen.
Action: Press any key to return to the
previous screen.
10) Comm.
If an error is detected during upload data, it aborts the process and returns
you the following messages.
PT name/number is longer than 12 digits.
Action : Press any key to return to the
MENU screen.
！Ｃａｎ’ｔ Ｅｄｉｔ
ＳＴ／ＢＳ ｒｅｆｅｒｓ ｔｏ
ｔｈｉｓ ｐｏｉｎｔ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
！Ｃｈａｎｇｅ Ｎａｍｅ
ＢＭ５７
ａｌｒｅａｄｙ ｅｘｉｓｔｓ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ
！ＵＰＬＯＡＤ ＥＲＲＯＲ
ＰＴ Ｍａｘ １２ｄｉｇｉｔｓ
Ｒｅｃｏｒｄ：６５８
！Ｃａｎ’ｔ Ｅｄｉｔ
Ｃｏｏｒｄｉｎａｔｅ ｆｒｏｍ
ｍｅａｓｕｒｅｄ Ｐｏｉ ｎｔ
Ｐｒｅｓｓ ａｎｙ ｋｅｙ