Nikon DTM-330 - Page 70

3-42
3
STN
Input the target height and press the
[ENT] key. When the coordinate is input
manually
on the previous screen, CD: can
be input on the screen. (Lst/Stk input are
not available on this screen.)
Sight known point 1 and press the [MSR],
[TRK], [4:F2] or [ENT] key. The [4:F2]
and [ENT] take an angle measurement.
By pressing [4] or just flipping the
telescope to Face2, you can take F1/F2
measurements.
Press the [ENT] key to proceed to the next
point input.
Input the second PT and the height of
target and take a measurement to the
second point.
Ｉｎｐｕｔ ２ｎｄ Ｐｏｉｎｔ
ＰＴ：
■
ＨＴ： １．５０００ｍ
ＣＤ：
１
Ｉｎｐｕｔ １ｓｔ Ｐｏｉｎｔ
ＰＴ：５５
ＨＴ： １．５０００ ｍ
ＣＤ：ＣＰ１
１
Ｓｉｇｈｔ ＰＴ１ ｏｎ Ｆ１
ＨＡ： １５０°３０′２７″
Ｐｒｅｓｓ ＭＳＲｏｒＥＮＴ
ＳＴＮ１／２ Ｆ２
Ｓｉｇｈｔ ＰＴ１ ｏｎ Ｆ１
ＨＡ： １５０°３０′２７″
ＨＤ： １０６．４２８９ｍ
ＳＴＮ１／２ Ｆ２
[MSR]
[F2] key is not available in DTM-330.