Nikon DTM-330 - Page 90

3-62
3
S-O
6: Arc-curve Reference Line (Arc)
Measuring distance and offset values on the arc-curve
Input the Start of the Curve point (P1) and
the azimuth of the tangent line (AZ1).
P1can be input through measuring to a
point by pressing the [Mode] key while
the cursor is on the P1 field.
Choose the method to define the arc.
1: Input P2 & AZ2
2: Input Radius & AZ2
3: Input Radius & Arc length
P2 can be any point on the tangent line
that is to exit the curve.
While inputting the radius (Rad), positive
value is for clockwise arc and negative is
for counterclockwise.
Ｓｔａｒｔ ｏｆ ｃｕｒｖｅ
Ｐ１：５８３
ＡＺ１：３５．４０３０
■
1
[ENT]
[ESC]
Ｄｅｆｉｎｅ ｃｕｒｖｅ
１：ＰＴ－ＡＺ
２：Ｒａｄｉｕｓ－ＡＺ
３：Ｒａｄｉｕｓ－Ｌｅｎｇｔｈ
1
Ｉｎｐｕｔ ｃｕｒｖｅ
Ｐ２：
■
ＡＺ２：
1
Ｉｎｐｕｔ ｃｕｒｖｅ
Ｒａｄ：
■
Ｌｅｎ：
1
Ｉｎｐｕｔ ｃｕｒｖｅ
Ｒａｄ：
■
ＡＺ２：
1
P1
P2
AZ
1
AZ
2
Rad
Len
O
(N
1
,E
1
)
(N
2
,E
2
)