CONTROL menu
60
Extensions
overview
This tool is used to view the installed extensions (plugins) that are included with
CONTROL. The extensions are found in the following folder:
C:\Program Files (x86)\NKT Photonics\NKTP CONTROL\Plugins
To view the extensions, open the Tools menu and click on Extensions Overview.
The Extensions Overview window will be launched as shown in Figure 33.
3 To download and save a log
file to the CONTROL PC, right
click the percentage indicator
and select either:
• Save log – Immediately
saves the fast or slow log
file onto the CONTROL
PC. If the percentage
shows less than 100%, the
log will be collected first.
See Collect log below.
• Collect log – Starts a
dedicated log collection
mode that disabled all other
CONTROL activity.
4 If you select Save Fast or Slow
log, a dialog box prompts for a
filename and folder to store the
log in.
5 If you select Collect Fast or
Slow log, the log is collected
and saved in dedicated mode.
The CONTROL panel turns
grey and all other functions are
disabled.
When the log is finished being
collected, all other CONTROL
functions will be enabled.
6 Select Restart Fast or Slow log
to clear all the collected log
data and restart the log data
collection.
Action
Right click
the % indicator
Connected
Modules
Percent
Collected
Dedicated collection mode
To Next Page
Loading...
Need help?
General
