91
A Specifications
Table 14 Optical
Table 15 Interfaces
Table 16 Mechanical dimensions and environment
Parameter
Repetition rate
1 Hz to min. 20 kHz
Spectral coverage
450 – 2400 nm
Total power
i
i. Repetition rate dependant
> 110 mW
Total VIS power (450-850 nm)
i
> 20 mW
Total power stability
ii
ii. For ± 0.5 % contact NKT Photonics
< ± 1.0 %
Output pulse width
< 2 ns
Pulse-pulse jitter (standard deviation)
i
< 2 us
Polarization
Unpolarized
Beam output
Gaussian, Single Mode
Beam quality TEM
M
2
< 1.1
Output beam divergence @500 nm
1.1 mrad ± 0.1 mrad
Waist width @500 nm
600 µm ± 60 µm
Waist location @500 nm
300 mm ± 150 mm
Optical Output Collimated
PC and micro processor interfaces
RS-232 serial COM - 9 Pin D-Sub Female Connector
USB 2.0 - Type B Female Connector
External Pulse Control
Coax trigger inpt: BNC -7 to 7 V analog input – pulse trigger
Output Control: 5.08 mm 2-pin terminal 0 to 30 V analog input – pulse trigger
Pulse Synchronization
Analog pulse output: BNC 0 to 2 V – analog synchronization pulse
Logic pulse output: BNC Monitor 0 V & 2.5 V – digital synchronization pulse
External Bus
RS-485 Bus - 15pin D-Sub Female Connector
Door Interlock
2 pin Connector - LEMO Part Number FGG.0B.302
Size (H x W x D)
93 x 220.5 x 367 mm (3.66
x 8.68 x 14.45 in)
Weight
3.5 kg (7.7 lb)
Operating temperature
18°C to 30°C (59°F to 86°F)
Operating humidity (non-condensing) 20 to 80%
To Next Page
Loading...
