NKT Photonics SuperK COMPACT User Manual

93
B Service and Support Information
Servicing the laser
The SuperK Extreme series lasers have no user serviceable components. In case
of malfunction, contact NKT Photonics using the support website listed below
under Support contact details.
End of line safety tests according to EN61010-1 Annex F are performed on all
Laser chassis.
Opening the laser
chassis
There are no user serviceable components inside the SuperK Extreme chassis.
Should your laser malfunction, and it cannot be serviced on site, it must be
shipped to the NKT Photonics Headquarters in Denmark.
WARRANTY VOID
IF REMOVED label
Chassis
The chassis is sealed with a label “WARRANTY VOID IF REMOVED”. It is strictly
prohibited to remove the chassis cover.
Figure 60 WARRANTY VOID LABEL
Collimator
The collimator housing is sealed with a label “WARRANTY VOID IF REMOVED”. It
is strictly prohibited to disassemble the collimator housing.
Figure 61 WARRANTY VOID IF REMOVED - Collimator
WARRANTY VOID IF SEAL
IS BROKEN OR REMOVED

NKT Photonics SuperK COMPACT Specifications

General

Brand	NKT Photonics
Model	SuperK COMPACT
Category	Measuring Instruments
Language	English