Table of Contents
ii
Part 1079832_04
E 2015 Nordson Corporation
Installation 3-1.................................................
Introduction 3‐1................................................
Unpacking 3‐1.................................................
Items Needed 3‐1..............................................
Applicator Installation 3‐2........................................
Mount the Applicator 3‐2......................................
Hose Installation 3‐4............................................
Air Supply Installation 3‐6........................................
Connect the Module‐Actuating Air 3‐6...........................
Connect the Pattern Air 3‐7....................................
Electrical Installation 3‐8.........................................
Connect the Cordsets 3‐8.....................................
Connect the Solenoid Valves 3‐8...............................
Applicator Flushing 3‐9..........................................
Prepare for Applicator Flushing 3‐9.............................
Flush the Hose 3‐10...........................................
Flush the Filter 3‐10...........................................
Flush the Manifold 3‐10........................................
Flush the Modules 3‐11........................................
Nozzle Installation 3‐11...........................................
Applicator Testing 3‐11...........................................
Operation 4-1..................................................
Introduction 4‐1................................................
Startup and Shutdown 4‐1.......................................
Starting the Applicator 4‐2.....................................
Shutting Down the Applicator 4‐2...............................
Adhesive Pattern Adjustment 4‐2.................................
Maintenance 5-1...............................................
Introduction 5‐1................................................
Required Tools and Supplies 5‐1.................................
Recommended Maintenance Schedule 5‐2........................
Troubleshooting 6-1............................................
Introduction 6‐1................................................
Troubleshooting Tables 6‐1......................................
Applicator Heating Problems 6‐2...............................
Adhesive Output Problems 6‐3.................................
Adhesive Leakage Problems 6‐5...............................
Air Supply Problems 6‐6......................................
Pattern Control Problems 6‐6..................................
Troubleshooting Procedures 6‐7..................................
Checking Solenoid Valve Mechanical Operation 6‐7..............
Checking Solenoid Valve Electrical Operation 6‐7................
Checking an Air Pressure Regulator 6‐8.........................