Filter
10-9
Part 1079832_04
E 2015 Nordson Corporation
Parts
This part of Section 10 provides detailed parts lists for the filter. For other
applicator parts, including a reference drawing and bill of materials specific to
your applicator, refer to Section 8, Parts. The following chart provides
guidance for reading the parts lists.
The number in the Item column corresponds to the circled item number
in the parts list illustration. A dash in this column indicates that the item is
an assembly.
The number in the Part column is the Nordson part number
you can use to order the part. A series of dashes indicates
that the part is not saleable. In this case, you must order
either the assembly in which the part is used or a service kit
that includes the part.
The Description column describes the part and
sometimes includes dimensions or specifications.
The Note column contains letters that refer to notes at
the bottom of the parts list. These notes provide
important information about the part.
The Quantity column tells you how many of the part
is used to manufacture the assembly shown in the
parts list illustration. A dash or AR in this column
indicates that the amount of the item required in
the assembly is not quantifiable.
Item Part Description Quantity Note
— 0000000 Assembly A —
1 000000 S Part of assembly A 2 A
2 ‐ ‐ ‐ ‐ ‐ ‐ S S Part of item 1 1
3 0000000 S S S Part of item 2 AR
NS 000000 S S S S Part of item 3 2
NOTE A: Important information about item 1
AR: As Required
NS: Not Shown
To Next Page
Loading...
Need help?
General
