Nortel 2004 - Accessing External Server Applications; Using Record On Demand Key

Accessing External Server Applications
133
Accessing External Server
Applications
Use External Server Applications to access a variety of applications
directly from your IP Phone 2004. For more information about the
External Server Applications, see the Nortel IP Phone External Server
Applications User Guide (NN43100-100).
Using Record On Demand key
If this feature is enabled, you can use the Record on Demand (ROD)
feature key to record your telephone conversation.
Press the ROD key to start or stop the call recording. This key is
associated with the active user ID and is displayed only if a call is active.
The ROD key blinks while it is connecting to the call recording application,
and is lit when the call is recording.
The ROD key is displayed in the following scenarios:
• Normal operation - Press the ROD key during an active call to record
the call.
• Call Recording (CR) application in ROD Mode - Press the ROD key
during an active call to record the call
• Bulk Recording - For an active call or unregistered DN/Position ID,
call recording is initiated even though the ROD key is not pressed..
1. Press the ROD key during an active call.
2. To stop the call recording, press the
ROD key again.