Additional call features
93
Using the Buzz signal
Use the Buzz feature to notify another person of a call, a visitor, or a
request. Two telephones that are linked together enable one person to
signal the other. The person signaled hears a buzz.
To buzz the telephone linked to your telephone:
Using Call Page Connect to make an
announcement
Use the Call Page Connect feature to make an announcement over a
paging system.
Note: A Page key on an attendant console overrides and disconnects
the telephones. The telephones must reaccess the page trunk.
To connect to Call Page:
2. Press the AutoDial key to call the
number desired.
3. Press the Goodbye key to end the call.
Press the Buzz key.The telephone linked to
your telephone buzzes as long as you press
the key.
1. Lift the handset.
(Goodbye)
To Next Page
Loading...
