Nortel 2004 - Using On-Hook Dialing

Making a call
49
Using on-hook dialing
Use on-hook dialing to dial the number before lifting the handset.
or
3. To terminate the call, choose one of the
following:
— Return the handset to the cradle.
— Press the Goodbye key.
1. Leave the handset in the cradle.
2. Press the line (DN) key.
3. Dial the number when the dial tone
sounds.
4. After the called party answers, lift the
handset.
5. To terminate the call, choose one of the
following:
— Replace the handset into the cradle.
— Press the Goodbye key.
(Goodbye)
or
(Goodbye)