Nortel 2004 - Configuring Area Code Setup

Configuring options
44
Configuring Area Code Setup
Using the Area Code menu, you can save up to 3 area codes. After an
incoming call arrives with an area code that matches one of the 3 stored
area codes, the incoming call number is reordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number).
This reordering is also performed when you scroll through your Callers
List.
To configure the area code, press the Services key, select Telephone
Options, and select Call Log Option from the menu.
To configure default area codes (3 maximum):
1. Press the Up/Down navigation keys to
scroll and to highlight Area Code Setup.
2. Press the Select soft key.
3. Press the Up/Down navigation keys to
scroll and to highlight one of the
following:
— Area Code # 1
— Area Code # 2
— Area Code # 3
4. Press the Select soft key.