Nortel 2004 - Using the Conferee Selectable Display and Disconnect Feature

Talking with more than one person
86
Using the Conferee Selectable Display
and Disconnect feature
Use the Conferee Selectable Display feature to list active conferees and
disconnect a conferee from the conference call.
To view active conferees:
To disconnect a conferee:
2. Press the line (DN) key beside the
flashing status icon to return to your
original call
.
1. While on a conference call, press the
Conferee Selectable Display key to
turn on the LCD indicator. Each key
press changes the screen to show a
different active conferee.
Note: This action has no effect on the
display of the telephones of the other
callers involved in the conference.
2. Press the Goodbye key. If configured,
the Conference Count Display returns
an updated total count of conferees. The
LCD indicator turns off.
1. While on a conference call, press the
Conferee Selectable Display key until
the conferee you want to disconnect
appears on the screen.
(Goodbye)