Talking with more than one person
87
Using Group Call
Use the Group Call feature to automatically call members of a predefined
group, one at a time, until they all answer.
To call group members:
2. Press the DN key on which the
conference call is established.
3. Choose one of the following:
— For a single conferee, press the
Goodbye key. If configured, the
Conference Count Display returns
an updated total count of conferees.
The LCD indicator turns off.
— For multiple conferees, repeat steps
1 and 2 until all conferees are
disconnected. Then press the
Goodbye key.
1. Lift the handset.
(Goodbye)
To Next Page
Loading...
