While on an active call
66
While on an active call
You can use the following features during an active call:
• “Placing a call on hold” on page 66
• “Transferring a call” on page 67
• “Using Timed Reminder Recall” on page 68
• “Using Attendant Recall” on page 69
• “Using Call Park” on page 69
• “Recording a Calling Party Number” on page 72
• “Displaying incoming calls” on page 72
• “Tracing a malicious call” on page 73
• “Incoming calls” on page 74
Placing a call on hold
Use the Hold feature when you are talking on one line and another call
arrives on a second line. To retain the original call, put it on hold and then
answer the second call.
To place a call on hold:
To retrieve a call on hold:
Press the Hold key. The LCD indicator
flashes beside the line on hold.
Note: If Automatic Hold is enabled, the
active call is automatically put on hold
when you answer the second call.
Press the line (DN) key beside the
flashing LCD indicator.
(Hold)
To Next Page
Loading...
