Nortel 2004 - Page 45

Configuring options
45
To edit the area code display:
5. Use the dialpad to enter the number at
the prompt.
6. Choose one of the following:
—Press the Select soft key to save the
configuration.
— Press the Cancel soft key to keep
the existing configurations.
1. Press the Up/Down navigation keys to
scroll and to highlight Area Code Setup.
2. Press the Select soft key.
3. Press the Up/Down navigation keys to
scroll and to highlight one of the
following:
— Area Code # 1
— Area Code # 2
— Area Code # 3
4. Press the Select soft key.
or