Nortel 2004 - Page 70

While on an active call
70
To park a call on the System Park DN or your own DN:
To park a call on a DN other than the System Park DN or your
own DN:
To park a call using the SPRE code or FFC:
During an active call, press the Park soft
key twice.
Note: By default, the call is parked on
your DN unless a System Park is
enabled to automatically park calls on
the system.
1. Press the Park soft key.
2. Dial the DN where you want to park the
call.
3. Press the Park soft key.
1. Choose one of the following.
— Press the Transfer soft key.
— Press the Conference soft key.
2. Dial the Call Park FFC.
or