Oce VarioPrint 6180 - Page 133

[Cover]
Setting Values Description
[Cover]
[Front]
Touch the button to toggle between [On] and
[Off]. When [Front] is [On] then the [Media]
setting below [Front] becomes enabled.
[Media] When [Front] is [On], you can select a media
from the media catalog to use as front cover.
[Print sides] When [Front] is [On], you can indicate which
side of the front cover must be printed. You
can select.
• [Both sides]
• [Front side]
• [Back side]
• [None]
[Back]
Touch the button to toggle between [On] and
[Off]. When [Back] is [On] then the [Media] set-
ting below [Back] becomes enabled.
[Media] When [Back] is [On], you can select a media
from the media catalogue to use as back cover.
[Print sides] When [Back] is [On], you can indicate which
side of the back cover must be printed. You
can select:
• [Both sides]
• [Front side]
• [Back side]
• [None]
Description of the print job settings that you can change on the control panel
Chapter 9 - Carry out print jobs
133
Océ VarioPrint 6000 line